Skip to main content
Pick your wall
Create with AI
Locking bin clip on slatwall, holding a stack-and-hang bin by its lip
Turn it in 3D

1 / 3Photo

Locks

Locking bin clip for slatwall

Hangs plastic bins by their back lip, or wire racks and baskets by their top wire.

Not test-printed yetBuilding…

Customize
Holds
Bins & tubs
Kind
Locking accessory clip
Prints as
One piece
Needs
Nothing to buy

Print settings, already in the 3MF

Worked out from your setup once the part has built.

Download

For Bambu Lab X1 / P1 / P2S / A1 · Bambu Studio · 4 colours · Standard fit ·

Print settings: supports automatic from the plate; key 75 % infill (change it in Your setup, under Fit).

File type

1 to 50 of the whole design, laid out on as many plates as your bed needs.

  • Filament 1 — Body, black
  • Filament 2 — Key and lever, azure

PrusaSlicer and other slicers get one 3MF per plate; Bambu Studio and OrcaSlicer get one 3MF with every plate.

    Locking bin clip

    Holds: Bins & tubs

    Prints as 1 piece

    Hangs plastic bins by their back lip, or wire racks and baskets by their top wire. It locks to the wall, so it can't lift out when you pull a bin off; use two per bin. Check each lever stands upright before you hang the bin, which hides it; print in PETG or ASA.

    CC BY 4.0 · Free

    Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

    Walls it fits

    • VEVOR PVC slatwallFits · some wall sizes assumed · not test-printed yet
    • StoreWallFits · some wall sizes assumed · not test-printed yet
    • HandiwallFits · some wall sizes assumed · not test-printed yet
    • Trusscore SlatWallFits · some wall sizes inferred · not test-printed yet
    • Retail MDF slatwall, 3 inFits · some wall sizes inferred · not test-printed yet
    • Flow WallFits · some wall sizes assumed · not test-printed yet
    • Gladiator GearWallWon't fit: its slot opening is 17 mm, and the cam-lock mount needs a slot opening from 8.5 to 11 mm
    • ProSlat PVC slatwallWon't fit: ProSlat doesn't publish its slot. Measure your wall and use Custom

    History

    1. 1.0.0

    More for bins & tubs

    Everything for bins & tubs ›