Building…

Small cube bin for slatwall

Not test-printed yetBuilding…

Colours

Puts this design back in its own colours. Designs you haven't coloured show their own colours too, until you pick new ones.

Set your own measurements

Bin size

Inside width

Across the wall, side to side

Inside depth

Out from the wall, back to front

Inside height

Up to about 46 mm the rim stays level with the hook seat; taller bins rise above it with a chamfered back so the bin still tips into the slot

Options

Drain hole

A diamond hole in the middle of the floor, so water or dust falls through

Holds: Small parts
Kind: Small cube bin
Prints as: One piece
Needs: Nothing to buy

Print settings, already in the 3MF

Worked out from your setup once the part has built.

Small cube bin

Holds: Small parts

Prints as 1 piece

Holds screws, bits and small parts in a small open bin that hangs on the wall. The hook is built in, so there's no separate hanger; an option adds a drain hole. Print in PETG or ASA, not PLA, and keep it to 1 kg.

CC BY 4.0 · Free

Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

Walls it fits

VEVOR PVC slatwallFits · some wall sizes assumed · not test-printed yet
StoreWallFits · some wall sizes assumed · not test-printed yet
HandiwallFits · some wall sizes assumed · not test-printed yet
Trusscore SlatWallFits · some wall sizes inferred · not test-printed yet
Retail MDF slatwall, 3 inFits · some wall sizes inferred · not test-printed yet
Flow WallFits · some wall sizes assumed · not test-printed yet
Gladiator GearWallWon't fit: its slot opening is 17 mm, and the cam-lock mount needs a slot opening from 8.5 to 11 mm
ProSlat PVC slatwallWon't fit: ProSlat doesn't publish its slot. Measure your wall and use Custom

History

First published 8 Oct 2026 1.1.0

More for small parts

Everything for small parts ›