Hose saddle on slatwall, holding a coiled garden hose

Building…

Hose saddle for slatwall

Not test-printed yetBuilding…

Colours

Puts this design back in its own colours. Designs you haven't coloured show their own colours too, until you pick new ones.

Set your own measurements

Saddle

Saddle width

Along the wall. The mount is as wide as the saddle, so the whole back bears on the wall

Saddle depth

From the wall to the front of the lip: how thick a coil it takes. About 25 mm of depth per loop of 5/8 in hose, plus 20 mm for the lip

Front lip height

How far the lip rises above the top of the saddle, so the coil can't slide off the front

Holds: Garden hose
Kind: Hose saddle
Prints as: One piece
Needs: Nothing to buy

Print settings, already in the 3MF

Worked out from your setup once the part has built.

Hose saddle

Holds: Garden hose

Prints as 1 piece

Holds a short coiled garden hose (up to 25 ft of 5/8 in) on a wide, curved saddle. The coil sits across the whole width, so it doesn't kink, and a lip keeps it on. Long hoses need a hose reel; print in PETG or ASA, not PLA.

CC BY 4.0 · Free

Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

Walls it fits

VEVOR PVC slatwallFits · some wall sizes assumed · not test-printed yet
StoreWallFits · some wall sizes assumed · not test-printed yet
HandiwallFits · some wall sizes assumed · not test-printed yet
Trusscore SlatWallFits · some wall sizes inferred · not test-printed yet
Retail MDF slatwall, 3 inFits · some wall sizes inferred · not test-printed yet
Flow WallFits · some wall sizes assumed · not test-printed yet
Gladiator GearWallWon't fit: its slot opening is 17 mm, and the cam-lock mount needs a slot opening from 8.5 to 11 mm
ProSlat PVC slatwallWon't fit: ProSlat doesn't publish its slot. Measure your wall and use Custom

History

First published 8 Oct 2026 1.0.0

More for garden hose

Everything for garden hose ›