Skip to main content
Pick your wall
Create with AI
Long-handle tool rack on slatwall, holding a broom

Building…

Long-handle tool rack for slatwall

Not test-printed yetBuilding…

Download

For Bambu Lab X1 / P1 / P2S / A1 · Bambu Studio · 4 colours · Standard fit ·

Print settings: supports automatic from the plate; key 75 % infill (change it in Your setup, under Fit).

File type

1 to 50 of the whole design, laid out on as many plates as your bed needs.

  • Filament 1 — Rack (PETG), black
  • Filament 2 — Cam key (PETG), azure

PrusaSlicer and other slicers get one 3MF per plate; Bambu Studio and OrcaSlicer get one 3MF with every plate.

    Long-handle tool rack

    Holds: Rake & shovel · Broom & mop

    Prints as 1 piece

    Holds rakes, shovels, hoes, forks and brooms head up in a comb of V-shaped slots. Slide a handle in from the front so the head rests on the fingers; lift and pull to remove it. Print in PETG or ASA, not PLA, and hang heavy spades and picks on steel.

    CC BY 4.0 · Free

    Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

    Walls it fits

    • VEVOR PVC slatwallFits · some wall sizes assumed · not test-printed yet
    • StoreWallFits · may be hard to hook on · some wall sizes assumed · not test-printed yet
    • HandiwallFits · some wall sizes assumed · not test-printed yet
    • Trusscore SlatWallFits · some wall sizes inferred · not test-printed yet
    • Retail MDF slatwall, 3 inFits · some wall sizes inferred · not test-printed yet
    • Flow WallFits · some wall sizes assumed · not test-printed yet
    • Gladiator GearWallWon't fit: its slot opening is 17 mm, and the multi-slot lock needs a slot opening from 8.5 to 11 mm
    • ProSlat PVC slatwallWon't fit: ProSlat doesn't publish its slot. Measure your wall and use Custom

    History

    1. 0.1.0

    More for rake & shovel

    Everything for rake & shovel ›