Skip to main content
Pick your wall
Create with AI
Slide-in sign holder on a slatwall
Turn it in 3D

1 / 5Photo

Labels & signs

Slide-in sign holder for slatwall

Holds a card, photo or sheet in a thin frame that hangs from the slot above it.

Not test-printed yetBuilding…

Customize
Holds
Labels
Kind
Sign holder
Prints as
5 pieces
Needs
Nothing to buy

Print settings, already in the 3MF

Worked out from your setup once the part has built.

Download

For Bambu Lab X1 / P1 / P2S / A1 · Bambu Studio · 4 colours · Standard fit ·

Print settings: supports automatic from the plate; key 75 % infill (change it in Your setup, under Fit).

File type

1 to 50 of the whole design, laid out on as many plates as your bed needs.

  • Filament 1 — Frame, #F2F2F2
  • Filament 2 — Clips and wedges, black

PrusaSlicer and other slicers get one 3MF per plate; Bambu Studio and OrcaSlicer get one 3MF with every plate.

    Slide-in sign holder

    Holds: Labels

    Prints as 5 pieces

    Holds a card, photo or sheet in a thin frame that hangs from the slot above it. Slide the card in from the open right end; press on it and slide it out to change it. Hang nothing else from it, and print the clips and wedges in PETG or ASA.

    CC BY 4.0 · Free

    Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

    Walls it fits

    History

    1. 1.0.0

    More for labels

    Everything for labels ›